CONSTRUCTION DRAWING SETS WITH THE SHOCK EFFECT OF THE MILLING CUTTER MACHINES

  • Валерий Иванович Ковалев Siberian State Technological University, pr. Mira, 82, Krasnoyarsk, 660049 Email: mapt@sibstu.kts.ru
  • Виктор Анатольевич Кожухов Siberian State Technological University, pr. Mira, 82, Krasnoyarsk, 660049 Email: mapt@sibstu.kts.ru
  • Юрий Давыдович Алашкевич Siberian State Technological University, pr. Mira, 82, Krasnoyarsk, 660049 Email: mapt@sibstu.kts.ru
DOI_disc_logo https://doi.org/10.14258/jcprm.1303239
Keywords: Time, headset, disc, single, perform, edge, knife, grinding, cutting, drawing, rotor, stator, peripheral speed, constructive options

Abstract

The article held to build and grapho-analytical checking of drawings with the trapezoidal shape of the working surface of single headset rotor and stator knives on the simultaneity of contact along the entire length of the cutting edge of converging in the Centre of the disc. Withdrawn analytical dependences for determination of time passing various points of cutting edges of the blades rotating rotor district arcs connecting these dots with corresponding points on the cutting edges of the blades stationary stator. A discussion of the results.  According to the results of the Graf-analytical experiment, conclusions are made.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biographies

Валерий Иванович Ковалев, Siberian State Technological University, pr. Mira, 82, Krasnoyarsk, 660049
доцент кафедры машин и аппаратов промышленных технологий, кандидат технических наук, тел.: (391) 227-34-53
Виктор Анатольевич Кожухов, Siberian State Technological University, pr. Mira, 82, Krasnoyarsk, 660049
старший преподаватель кафедры машин и аппаратов промышленных технологий,  тел.: (391) 227-34-53
Юрий Давыдович Алашкевич, Siberian State Technological University, pr. Mira, 82, Krasnoyarsk, 660049
заведующий кафедрой  машин и аппаратов промышленных технологий МАПТ, профессор, доктор технических наук, тел.: (3912) 27-34-53

References

Патент 2227826 (RU). Размалывающая гарнитура для дисковой мельницы / Ю.Д. Алашкевич, В.И. Ковалев. 2004.

Ковалев В.И., Алашкевич Ю.Д., Набиева А.А. Влияние рисунка гарнитуры на процесс размола волокнистых полуфабрикатов. Красноярск, 2010. Ч. 1. 168 с.

Кожухов В.А., Ковалев В.И., Алашкевич Ю.Д. Ударный эффект при воздействии ножевой гарнитуры как фактор повышения качества размола // Вестник Сибирского государственного аэрокосмического универси-тета имени академика М.Ф. Решетнева. 2006. №5. С. 130–132.

Published
2013-10-20
How to Cite
1. Ковалев В. И., Кожухов В. А., Алашкевич Ю. Д. CONSTRUCTION DRAWING SETS WITH THE SHOCK EFFECT OF THE MILLING CUTTER MACHINES // chemistry of plant raw material, 2013. № 3. P. 239-242. URL: http://journal.asu.ru/cw/article/view/jcprm.1303239.
Issue
No 3 (2013)
Section
Technology

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

The authors, which are published in this journal, agree to the following conditions:

1. Authors retain the copyright to the work and transfer to the journal the right of the first publication along with the work, at the same time licensing it under the terms of the Creative Commons Attribution License, which allows others to distribute this work with the obligatory indication of the authorship of this work and a link to the original publication in this journal .

2. The authors retain the right to enter into separate, additional contractual agreements for the non-exclusive distribution of the version of the work published by this journal (for example, to place it in the university depository or to publish it in a book), with reference to the original publication in this journal.

3. Authors are allowed to post their work on the Internet (for example, in a university repository or on their personal website) before and during the review process of this journal, as this may lead to a productive discussion, as well as more links to this published work.