DEVELOPMENT OF TECHNOLOGY FOR PRODUCTION OF DISSOLVING WOOD PULP
UDC 676.163.023.1
Abstract
The work is devoted to the study of possibility and expediency of ECF bleaching for semi-chemical pulp with production of dissolving pulp, which is very popular in Russia and in the world. Production of dissolving wood pulp is important to replace cotton pulp obtained from imported raw materials.
The conditions of bleaching and alkali treatment of sulfite pulp are investigated. CA dissolving pulp grade P was produced. To this end, new environmentally reliable short bleaching and alkali treatment schemes of sulfite pulp have been developed using only two oxidizing reagents: hydrogen peroxide and sodium chlorite. The bleaching schemes are based on the ECF technology developed earlier by the authors.
Bleached dissolving pulp CA grade P was obtained according to all proposed schemes, including the shortened scheme Pa–E–Ch1–HAT–Ch2–A; pulp with increased yield was obtained due to good selectivity of the used chemicals under the developed conditions of delignification and bleaching, which contributes to the economy of wood. The possibility of obtaining pulp for viscose according to the above scheme is also shown.
The results of studies have shown the possibility of obtaining wood pulp CA grade P from these raw materials by TCF technology with the use for delignification and bleaching (after alkali treatment) of hydrogen peroxide in an acidic and traditional alkaline medium, respectively.
Downloads
Metrics
References
Kosaya G.S. Proizvodstvo sul'fatnoy viskoznoy tsellyulozy. [Production of sulfate viscose pulp]. Moscow, 1966, 181 p. (in Russ.).
Novozhilov Ye.V., Novozhilov Ye.V., Poshina D.N. Khimiya Rastitel'nogo Syr'ya, 2011, no. 3, pp. 15–32. (in Russ.).
Valishina Z.T., Golubev A.Ye., Ibragimov N.G., Kostochko A.V. Vestnik tekhnologicheskogo universiteta, 2015, vol. 18, no. 24, pp. 77–81. (in Russ.).
Yakusheva A.A. Sbornik materialov VI Vserossiyskoy nauchno-prakticheskoy konferentsii studentov, aspirantov i molodykh uchenykh s mezhdunarodnym uchastiyem «Tekhnologii i oborudovaniye khimicheskoy, biotekhiologicheskoy i pishchevoy promyshlennosti». [The collection of materials of the VI All-Russian scientific-practical conference of stu-dents, graduate students and young scientists with international participation "Technologies and equipment of the chemi-cal, biotechnological and food industry"]. Biysk, 2013, pp. 139–141. (in Russ.).
Tekhnologiya tsellyulozno-bumazhnogo proizvodstva. Spravochnyye materialyyu. T. 1. Syr'ye i proizvodstvo polufabri-katov. CH. 2. Proizvodstvo polufabrikatov. [Pulp and paper technology. Reference materials. Vol. 1. Raw materials and production of semi-finished products. Part 2. Production of semi-finished products]. St. Petersburg, 2003, 633 p. (in Russ.).
Shumnyy V.K., Kolchanov N.A. et al. Informatsionnyy vestnik VOGiS, 2010, vol. 14, no. 3, pp. 569–577. (in Russ.).
Shpakov F.V., Nevolin V.F. Nauchno-tekhnicheskaya konferentsiya RAR-FOR 98. [Scientific and Technical Conference PAP-FOR 98]. St. Petersburg, 1998, pp. 74–79. (in Russ.).
Tekhnologiya tsellyulozno-bumazhnogo proizvodstva. Spravochnyye materialy. T. III. Avtomatizatsiya, standartizatsi-ya, ekonomika i okhrana okruzhayushchey sredy. CH. 3. Nailuchshiye dostupnyye tekhnologii v tsellyulozno-bumazhnoy promyshlennosti. [Pulp and paper technology. Reference materials. Vol. III. Automation, standardization, economics and environmental protection. Part 3. The best available technologies in the pulp and paper industry]. St. Pe-tersburg, 2012, 294 p. (in Russ.).
Bogolitsyn K.G. Rossiyskiy khimicheskiy zhurnal, 2004, vol. XLVIII, no. 6, pp. 105–123. (in Russ.).
Nevolin V.F., Shpakov F.V., Zarudskaya O.L., Zvezdina L.K., Stebunov O.B. Tsellyuloza. Bumaga. Karton, 2000, no. 5–6. С. 18–19. (in Russ.).
Akim G.L. Tsellyuloza. Bumaga. Karton, 2001, no. 5–6, pp. 24–28. (in Russ.).
Glyad V.M., Politova N.K., Ponomarev D.A. Khimiya Rastitel'nogo Syr'ya, 2009, no. 4, pp. 27–30. (in Russ.).
Sergeyev A.D., At'man O.P., Sergeyeva I.V. Tsellyuloza. Bumaga. Karton, 2008, no. 2, pp. 58–62. (in Russ.).
Milovidova L.A. et al. Promyvka i otbelka tsellyulozy: uchebnoye posobiye. [Washing and bleaching of pulp: a training manual ]. Arkhangelsk, 2013, 212 p. (in Russ.).
Steffes F., Germgard U. Pulp & Paper, 1995, no. 6, pp. 83–92.
Fedorova E.I., Kuzivanova A.V. Tsellyuloza. Bumaga. Karton, 2007, no. 5, pp. 52–54. (in Russ.).
Hart P.W., Rudie A.W. The Bleaching of Pupl, 5th Edition. Tappi Press., 2012, pp. 13–14.
Khakimova F.Kh., Sinyayev K.A., Nagimov D.R. Lesnoy zhurnal, 2016, no. 3/351, pp. 147-156. DOI: 10.17238/ISSN0536-1036.2016.3.147. (in Russ.).
Khakimova F.Kh., Sinyayev K.A. Khimiya Rastitel'nogo Syr'ya, 2013, no. 2, pp. 57–62. (in Russ.).
Khakimova F.Kh., Sinyayev K.A., Kovtun T.N. Lesnoy zhurnal, 2012, no. 4, pp. 112–121. (in Russ.).
Pen R.Z. Planirovaniye eksperimenta v Statgraghics. [Planning an experiment at Statgraghics]. Krasnoyarsk, 2003, 246 p. (in Russ.).
Khakimova F.Kh., Sinyayev K.A. Zhurnal prikladnoy khimii, 2014, vol. 87, no. 9, pp. 1329–1335. (in Russ.).
Starostenko N.P., Nepenin N.N. Sbornik trudov LTA, 1980, no. 80, pp. 3–17. (in Russ.).
Zhegrov E.F., Milekhin Yu.M., Berkovskaya Ye.V. Khimiya i tekhnologiya ballistitnykh porokhov, tverdykh raketnykh i spetsial'nykh topliv. T. 2. Tekhnologiya: Monografiya. [Chemistry and technology of ballistic powders, solid rocket and special fuels. Vol. 2. Technology: Monograph]. Moscow, 2011, 551 p. (in Russ.).
![](http://journal.asu.ru/public/journals/1/article_6677_cover_ru_RU.png)
Copyright (c) 2020 Khimiya Rastitel'nogo Syr'ya (Chemistry of plant raw material)
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors, which are published in this journal, agree to the following conditions:
1. Authors retain the copyright to the work and transfer to the journal the right of the first publication along with the work, at the same time licensing it under the terms of the Creative Commons Attribution License, which allows others to distribute this work with the obligatory indication of the authorship of this work and a link to the original publication in this journal .
2. The authors retain the right to enter into separate, additional contractual agreements for the non-exclusive distribution of the version of the work published by this journal (for example, to place it in the university depository or to publish it in a book), with reference to the original publication in this journal.
3. Authors are allowed to post their work on the Internet (for example, in a university repository or on their personal website) before and during the review process of this journal, as this may lead to a productive discussion, as well as more links to this published work.