CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES OF VARIOUS PARTS OF BIRCH WOOD
UDC 674.038.1
Abstract
The article compares mechanical parameters, group chemical compositions, iron content, lipid compositions before and after saponification, moisture, bulk density in three parts of Betula pubescens Ehrh. birch wooden parts: sapwood, false heartwood, false heartwood border. The strength properties of the false heartwood are worse than those of sapwood. The border of the false core is sometimes stronger than that of other parts. Evaluation is carried out in terms of hardness, flexural strength and compression strength. False heartwood, and even more so its border, contain more extractives extracted by ethanol, water, alkali solution, methylene chloride and less iron. The content of other components: cellulose, lignin, other polysaccharides differs, but less significantly. False heartwood border is heavier than the other wooden parts. Moisture content of the various parts decreases in the following order: false heartwood border, false heartwood, sapwood. The composition of the extractives extracted by methylene chloride is different in different parts. The composition is determined by gas-liquid chromatography-mass spectrometry before and after saponification of esters. Differences in sterols are given. An increased content of monoterpene alcohols and arylheptanoids is observed at the border. Differences in the properties of different wooden parts of a tree are explained by different amount and composition of extractives.
Downloads
Metrics
References
Willför S., Sundberg A., Pranovich A., Holmbom B. Wood Science and Technology, 2005, vol. 39, pp. 601–617. DOI: 10.1007/s00226-005-0039-4.
Miranda I., Sousa V., Ferreira J., Pereira H. PLoS ONE, 2017, vol. 12, pp. 1–14. DOI: 10.1371/journal.pone.0179268.
Rykunin S.N., Kaptelkin A.A. Lesnoy zhurnal, 2019, no. 6, pp. 202–212. DOI: 10.17238/issn0536-1036.2019.6.202. (in Russ.).
Alekseeva L.G. Sbornik rabot po zaschite lesa. [Collection of works on forest protection]. 1957, no. 1, pp. 65–71. (in Russ.).
Alekseeva L.G. Lesnoy zhurnal, 1958, no. 6, pp. 13–23. (in Russ.).
Belleville B., Cloutier A., Achim A. Can. J. For. Res., 2011, vol. 41, pp. 1491–1499. DOI: 10.1139/x11-080.
Shigo A.L., Hillis W.E. Annual Review of Phytopathology, 1973, vol. 11, pp. 197–222. DOI: 10.1146/annurev.py.11.090173.001213.
Hallaksela A.M., Niemistö P. Scand. J. For. Res., 1998, vol. 13, pp. 169–176. DOI: 10.1080/02827589809382973.
Hörnfeldt R., Drouin M., Woxblom L. Ecological Bulletins Broadleaved Forests in southern Sweden: management for multiple goals, 2010, vol. 53, pp. 61–76.
Sinadsky Yu.V. Beresa i ee vrediteli. [Beresa and its pests]. Moscow, 1973, 220 p. (in Russ.).
GOST 16483.10-73. Drevesina. Metody opredeleniya predela prochnosti pri szhatii vdol' volokon (s Modifikatsiyami N 1, 2, 3) [GOST 16483.10-73. Wood. Methods for determining the ultimate strength in compression along the fibers (with Modifications N 1, 2, 3)]. Moscow, 1999, 7 p. (in Russ.).
GOST 16483.3-84. Drevesina. Metod opredeleniya predela prochnosti pri staticheskom izgibe [GOST 16483.3-84. Wood. Method for determination of ultimate strength in static bending]. Moscow, 1999, 7 p. (in Russ.).
GOST 16483.17-81. Drevesina. Metod opredeleniya staticheskoy tverdosti [GOST 16483.17-81. Wood. Method for determination of static hardness]. Moscow, 1999, 7 p. (in Russ.).
GOST 16483.0-89. Drevesina. Obshchiye trebovaniya k fiziko-mekhanicheskim ispytaniyam [GOST 16483.0-89. Wood. General requirements to physical and mechanical tests]. Moscow, 1999, 11 p. (in Russ.).
TAPPI T222 om: 2011. Acid-Insoluble Lignin in Wood and Pulp. Technical Association of the Pulp and Paper Indus-try, 2006, 14 p.
TAPPI T204: 2011. Solvent extractives of wood and pulp. Technical Association of the Pulp and Paper Industry: Peachtree Corners, GA, 2011, 12 p.
TAPPI T 212 om-2012 (R2018). One Percent Sodium Hydroxide Solubility of Wood and Pulp. Technical Association of the Pulp and Paper Industry, 2018, 4 p.
Swan B. Svensk Papperstidn, 1965, vol. 68, pp. 791–795.
Obolenskaya A.V., Elnitskaya Z.P., Leonovich A.A. Laboratornyye raboty po khimii drevesiny i tsellyulozy: Uchebnik dlya vuzov. [Laboratory work in the chemistry of wood and cellulose: Textbook for higher schools]. Moscow, 1991, 320 p. (in Russ.).
TAPPI T223: 2008. Pentosanes in wood and pulp. Technical Association of the Pulp and Paper Industry, 2010, 5 p.
TAPPI T207: 2008. Water Solubility of Wood and Pulp. 2008, 3 p.
TAPPI T211: 2016. Ash in Wood, Pulp, Paper and Paperboard: Combustion at 525 °C. 2016, 5 p.
Shulishov E.V., Klimenko I.P., Tomalin Yu. Sintezy organicheskikh soyedineniy. [Syntheses of Organic Compounds]. Moscow, 2008, pp. 266–269. (in Russ.).
Evert R.F. Rastitel'naya anatomiya Isava. Meristemy, kletki i tkani rastitel'nogo organizma: ikh stroyeniye, funktsii i razvitiye [Esau’s plant anatomy. Meristems, cells, and tissues of the plant body: their structure, function, and develop-ment]. Moscow, 2015, 600 p. (in Russ.).
Pape R. Rödkärna i björk: uppkomst, egenskaper och användning = Red heart in birch : origin, properties, and utili-zation. 2002.
Luostarinen K., Hakkarainen K. Scand. J. of Forest Research, 2019, vol. 34, pp. 577–584. DOI: 10.1080/02827581.2019.1662939.
Voipio R., Laakso T. Folia Forestalia, 1992, vol. 789, pp. 1–22.
Lönnberg B. Paperi ja Puu, 1975, vol. 8, pp. 507–516.
Lachowicz H., Wro´blewska H., Sajdak M., Komorowicz M., Wojtan R. Cellulose, 2019, vol. 26, pp. 3047–3067. DOI: 10.1007/s10570-019-02306-2.
Jahng Y., Park J.G. Molecules, 2018, vol. 23, pp. 3107–3149. DOI: 10.3390/molecules2312310.
Ponkratova A.O., Vedernikov D.N., Whaley A.K., Kuncova M.N., Smirnov S.N., Serebryakov E.B., Spiridono-va D.V., Luzhanin V.G. Natural Product Research, 2021, vol. 35, pp. 1–9. DOI: 10.1080/14786419.2021.2017930.
Beritognolo I., Magel E., Abdel-Latif A., Charpentier J.-P., Jay-Allemand C., Breton C. Tree Physiology, 2002, vol. 22, pp. 291–300. DOI: 10.1093/treephys/22.5.291.
Takanori I. Mokuzai Gakkaishi, 2012, vol. 58, pp. 11–22. DOI: 10.2488/jwrs.58.11.
Copyright (c) 2022 chemistry of plant raw material
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors, which are published in this journal, agree to the following conditions:
1. Authors retain the copyright to the work and transfer to the journal the right of the first publication along with the work, at the same time licensing it under the terms of the Creative Commons Attribution License, which allows others to distribute this work with the obligatory indication of the authorship of this work and a link to the original publication in this journal .
2. The authors retain the right to enter into separate, additional contractual agreements for the non-exclusive distribution of the version of the work published by this journal (for example, to place it in the university depository or to publish it in a book), with reference to the original publication in this journal.
3. Authors are allowed to post their work on the Internet (for example, in a university repository or on their personal website) before and during the review process of this journal, as this may lead to a productive discussion, as well as more links to this published work.