DIRECT METHOD OF QUALITY CONTROL SURFACE COATED TYPES OF PAPER
Abstract
The possibilities of surface quality analysis of coated paper types using atomic force microscopy are considered. It is shown that the technique of surface analysis of pulp and paper materials using AFM is quite versatile and gives a reliable characterization of roughness of different types of pulp and paper products. In contrast to traditional "air" quality control methods for of paper products, which are standardized in ISO system, and through of national and industry standardization systems (GOST, DIN, SCAN, TAPPI), this method gives a direct image of the surface topography (close to 3D image). Processing of the image surface of the sheet using embedded software allows calculating the roughness in full accordance with the requirements of GOST 2789-73 and the international recommendations for the standardization of ISO P 468. It should be noted that the obtained data are consistent with those obtained by other methods, however, in some cases, equal to indirect measure of roughness specified by the manufacturer, the direct calculation of the Ra parameter according to the AFM gives different results. This method of direct surface analysis of coated papers used in the work, can in future be considered as a method of operative control processes for the surface treatment of various materials.Downloads
Metrics
References
GOST 30115-95 (ISO 8791-1) Bumaga i karton. Opredelenie sherokhovatosti/gladkosti (metody s primeneni-em propuskaniia vozdukha). Obshchie trebovaniia. [GOST 30115-95 (ISO 8791-1) Paper and paperboard. Determination of roughness / smoothness (methods using air transmission). General requirements]. Moscow, 1999, 7 p. (in Russ.).
GOST 2789-73 (Rekomendatsiia ISO R 486) Sherokhovatost' poverkhnosti. Parametry i kharakteristiki. [GOST 2789-73 (Recommendation ISO R 486) surface roughness. Parameters and characteristics]. Moscow, 2006, 7 p. (in Russ.).
MI 41-75 Metodika vypolnenia izmerenii parametrov sherokhovatosti poverkhnosti po GOST 2789–73 pri pomoshchi priborov profil'nogo metoda. [MI 41-75 method for measuring surface roughness parameters according to GOST 2789-73 method of using profile devices]. Moscow, 1975, 18 p. (in Russ.).
GOST 12795-89 (ISO 5627) Bumaga i karton. Metod opredeleniia gladkosti po Bekku. [GOST 12795-89 (ISO 5627) Paper and paperboard. Method for determination of smoothness Becca]. Moscow, 1989, 7 p. (in Russ.).
GOST 30022.2-93 (ISO8791-2-90) Bumaga i karton. Metod opredeleniia sherokhovatosti (metod s primeneniem propuskaniia vozdukha). Metod Bendtsena. [GOST 30022.2-93 (ISO8791-2-90) Paper and paperboard. determination of roughness method (method using air transmission). Bendtsen method]. Moscow, 1993, 17 p. (in Russ.).
DIN ISO 8791-4:2008-05 Paper and board – Determination of roughness/smoothness (air leak methods) – Part 4: Print-surf method (ISO 8791-4:2007). 26 p.
Kompaniia FRANK-PTI – Martin Kal'tenbrunner. – PTA-Line Print Surf (PPS) Rukovodstvo po ekspluatatsii. [The company FRANK-PTI – Martin Kaltenbrunner. – PTA-Line Print Surf (PPS) Operating Instructions]. 2011, 16 p. (in Russ.).
Viacheslavova O.F., Bavykin O.B. Sovremennye metody otsenki kachestva poverkhnosti detalei mashin: uchebnoe posobie. [Modern methods of assessing the quality of machine parts surface: a tutorial]. Moscow, 2010, 74 p. (in Russ.).
Zhukov M.V. Nauchno-tekhnicheskii vestnik informatsionnykh tekhnologii, mekhaniki i optiki, 2014, no. 1, pp. 44–49. (in Russ.).
Jandira Maria de O.B. Brandão. Anal. Methods, 2016, pp. 771–784.
Antonenko S.V. Nauchnaia sessiia MIFI, 2010, vol. 3, pp. 34–35. (in Russ.).
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors, which are published in this journal, agree to the following conditions:
1. Authors retain the copyright to the work and transfer to the journal the right of the first publication along with the work, at the same time licensing it under the terms of the Creative Commons Attribution License, which allows others to distribute this work with the obligatory indication of the authorship of this work and a link to the original publication in this journal .
2. The authors retain the right to enter into separate, additional contractual agreements for the non-exclusive distribution of the version of the work published by this journal (for example, to place it in the university depository or to publish it in a book), with reference to the original publication in this journal.
3. Authors are allowed to post their work on the Internet (for example, in a university repository or on their personal website) before and during the review process of this journal, as this may lead to a productive discussion, as well as more links to this published work.