APPLICATION OF TITANYL SULPHATE FOR MANUFACTURING PAPER CONTAINING TIO2 FILLER
Abstract
The aim of research was first, to study the interactions between components for finding out how pH effects on ζ-potential, dewatering rate and retention of TiO2/MCC mixtures with/without titanyl sulphate in order to find a way to titanyl sulphate hydrolysis in a papermaking process. The maximum heterocoagulation interactions between TiO2, MCC and TiOSO4 were revealed in the pH range 4.4–5.6. Second, handsheets made from refined chemical pulp, titanyl sulphate and TiO2 at pH 4.4 were investigated. The handsheets were formed and studied conventionally and with scanning electron microscopy (SEM). It was shown that titanyl sulphate hydrolysis leads to formation of translucent polymer film covering the fibres and TiO2 particles. The maximum first-pass ash retention reached is lower than its values usually obtained with an organic polymer. Addition of titanyl sulphate led to higher strength, but lowered opacity and brightness compared to a reference sample. The use of low dosage of titanyl sulphate together with a filler improved air permeability. As there exist certain advantages/disadvantages of titanyl sulphate application, extended research is needed to find suitable conditions for its applying to mass paper and board grades production.
Downloads
Metrics
References
Handbook of Paper and Board, 2nd Rev. a. Enlarged Ed., Holik H. (Ed.) Weinheim; Wiley-VCH, 2013. 505 p.
Ibrahem A.A., Nada A.M.A., El-Saied H. and El-Ashmawy A.E. Angew. Makromol. Chem., 1984, vol. 127, pp. 89–102.
Applications of Wet-End Paper Chemistry, 2nd Ed. Thorn, I., Au, C.O. (Eds.) London; Springer, 2009. 232 p.
Grzmil B.U., Grela D. and Kic B. Chem. Pap., 2008, vol. 62, no. 1, pp. 18–25.
Mamchenko A.V, Gerasimenko N.G., Deshko I.I. and Pakhar’ T.A. J. Water Chem. Technol., 2010, vol. 32, pp. 167–175.
Bavykin D.V., Dubovitskaya V.P., Vorontsov A.V. and Parmon V.N. Res. Chem. Intermed., 2007, vol. 33, no. 3-5, pp. 449–464.
Bavykin D.V., Savinov E.N and Smirniotis P.G. React. Kinet.Catal. Lett., 2003, vol. 79, no. 1, pp. 77–84.
Marques P., Trindade T. and Neto C.P. Compos. Sci. Technol., 2006, vol. 66, pp. 1038–1044.
Patent 1718924 A (CN). 2006.
van de Steeg, H.G.M., de Keizer A., Cohen Stuart M.A. and Bijsterbosch B.H. Colloids Surf., A, 1993, vol. 70, no. 1, pp. 77–89.
Sandell L.S. and Luner P. Appl. Polym. Sci., 1974, vol. 18, pp. 2075–2083.
Delgado A.V., González-Caballero F., Hunter R.J., Koopal L.K. and Lyklema J. Pure Appl. Chem., 2005, vol. 77, no. 10, pp. 1753–1805.
Moyer L.S. Bacteriol. Rev., 1935, pp. 531–546.
Derjaguin B.V. Discuss. Faraday Soc., 1954 vol. 18, pp. 85–98.
Siffert B. and Metzger J.-M. Colloids Surf., A., 1991, vol. 53, no. 1, pp. 79–99.
Patent 5705033 (US). 1998.
Pelton R.H. and Allen L.H. Colloid. Polym. Sci., 1983, vol. 261, no. 6, pp. 485–492.
![](http://journal.asu.ru/public/journals/1/cover_article_3603_en_US.jpg)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors, which are published in this journal, agree to the following conditions:
1. Authors retain the copyright to the work and transfer to the journal the right of the first publication along with the work, at the same time licensing it under the terms of the Creative Commons Attribution License, which allows others to distribute this work with the obligatory indication of the authorship of this work and a link to the original publication in this journal .
2. The authors retain the right to enter into separate, additional contractual agreements for the non-exclusive distribution of the version of the work published by this journal (for example, to place it in the university depository or to publish it in a book), with reference to the original publication in this journal.
3. Authors are allowed to post their work on the Internet (for example, in a university repository or on their personal website) before and during the review process of this journal, as this may lead to a productive discussion, as well as more links to this published work.