THE CONVERSION OF THE MOISTURE-STABILITY WASTE-PAPERS WITH POLYMERIC COVERING. 2. CHAR-ACTERISTIC OF THE WASTE PAPER
UDC 676.2.038.23.024.5:676.266
Abstract
Influence of the thermochemical processing (the cook) conditions and of the milling on characteristic of the waste paper with polyurethan and polyaziridin was studied. The waste paper was reduced to the degree size of the particles 5...8 mm in mill of the dry grind and chemical processing under higher temperature (to 70 °C) by solution, contain sodium persulfate and hydroxide; duty of water 6. Duration of cook varied from 1 to 5 hours, expense of persulfate sodium varied from 2 to 12%, hydroxide sodium – from 0.5 to 3% from mass of the waste-papers. The secondary fiber was obtaining by breaking-up of the pulp in the hydropulper. The dependency of the length and factor of the form of the secondary fiber from conditions cook was absent. The slight width increasing of the fibers with the higher pH of cooking liquor was determined: from 26.5 мкм under pH 3–4 to 29 мкм under pH 8–9. The conjectural reason is swelling of the cell wall. The waste paper milling was executed in the «stream-barrier» machine. The strength properties of the paper correspond with the feature, inherent of the secondary pulp.
Downloads
Metrics
References
Alashkevich Yu.D., Pen R.Z., Karetnikova N.V., Chendylova L.V. Khimiya Rastitel'nogo Syr'ya, 2019, no. 4, pp. 399–405. (in Russ.).
Tekhnologiya tsellyulozno-bumazhnogo proizvodstva. T. I. Syr'ye i proizvodstvo polufabrikatov. Ch. 3. Proizvodstvo polufabrikatov. [Pulp and paper technology. Vol. I. Raw materials and production of semi-finished products. Part 3. Production of semi-finished products]. St. Petersburg, 2004, 316 p. (in Russ.).
Puzyrev S.S., Tyurin Ye.T., Volkov V.A., Kovaleva O.P. Pererabotka vtorichnogo voloknistogo syr'ya. [Recycling of recycled fiber]. St. Petersburg, 2007, 467 с. (in Russ.).
Chernaya I.I., Bryantseva Z.U. Tsellyuloza. Bumaga. Karton, 1993, no. 8–9, pp. 28–29. (in Russ.).
Alashkevich Yu.D. Osnovy teorii gidrodinamicheskoy obrabotki voloknistykh materialov v razmol'nykh mashinakh: dis. ... dokt. tekhn. nauk. [Fundamentals of the theory of hydrodynamic processing of fibrous materials in grinding ma-chines: dis. ... doc. tech. of sciences]. Krasnoyarsk, 1990, 361 p. (in Russ.).
Alashkevich Yu.D., Marchenko R.A., Reshetova N.S. Khimiya Rastitel'nogo Syr'ya, 2009, no. 2, pp. 157–163. (in Russ.).
Kryazhev A., Shpacov P., Vasilieva Е. at al. East European Paper Recycling Symposium. Warsaw, 1997, pp. EX1–EX8.
Kreshkov A.P. Osnovy analiticheskoy khimii. [Fundamentals of Analytical Chemistry]. Moscow, 1970, vol. 2, 412 p. (in Russ.).
Pen R.Z. Statisticheskiye metody modelirovaniya i optimizatsii protsessov tsellyulozno-bumazhnogo proizvodstva. [Sta-tistical methods of modeling and optimization of pulp and paper production processes]. Krasnoyarsk, 1982, 192 p. (in Russ.).
Adler Yu.P., Markova Ye.V., Granovskiy Yu.V. Planirovaniye eksperimenta pri poiske optimal'nykh usloviy. [Plan-ning an experiment to find optimal conditions]. Moscow, 1976, 284 p. (in Russ.).
Pen R.Z. Planirovaniye eksperimenta v Statgraphics Centurion. [Planning an Experiment at Statgraphics Centurion]. Krasnoyarsk, 2014, 293 p. (in Russ.).
Karlsson H. Fiber Guide. Fiber analysis and process. Applications in the pulp and paper industry. AB Lo-rentzen&Werrte, 2006, 120 p.
Pen R.Z., Karetnikova N.V., Chendylova L.V. «Perspektivy razvitiya tekhniki i tekhnologii v tsellyulozno-bumazhnoy i lesopererabatyvayushchey promyshlennosti». Materialy konferentsii. ["Prospects for the development of machinery and technology in the pulp and paper and wood processing industries." Conference proceedings]. Yekaterinburg, 2019, pp. 70–72. (in Russ.).
Flyate D.M. Svoystva bumagi. [Paper properties]. Moscow, 2012, 381 p. (in Russ.).
Pen R.Z., Karetnikova N.V., Shapiro I.L. Peroksidnaya tsellyuloza. [Peroxide cellulose]. Saarbrucken, 2013, 241 p. (in Russ.).
Vshivkova I.A., Pen R.Z., Karetnikova N.V. Khimiya Rastitel'nogo Syr'ya, 2013, no. 2, pp. 37–41. (in Russ.).
Vanchakov M.V., Kuleshov A.V., Dubovoy Ye.V., Kazakov Ya.V., Dubovyy V.K. Tekhnologiya i oborudovaniye pererabotki makulatury. [Technology and equipment for waste paper recycling]. St. Petersburg, 2017, 322 p. (in Russ.).
Timoshchuk T.S., Vasil'yeva Ye.I. Tsellyuloza. Bumaga. Karton, 1998, no. 1–2, pp. 24–25. (in Russ.).
Dul'kin D.A., Spiridonov V.A., Komarov V.I., Blinova L.A. Svoystva tsellyuloznykh volokon i ikh vliyaniye na fiziko-mekhanicheskiye kharakteristiki bumagi i kartona. [Properties of cellulose fibers and their effect on the physicomechan-ical characteristics of paper and paperboard]. Arkhangelsk, 2011, 176 p. (in Russ.).
![](http://journal.asu.ru/public/journals/1/article_5638_cover_ru_RU.png)
Copyright (c) 2020 Khimiya Rastitel'nogo Syr'ya (Chemistry of plant raw material)
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors, which are published in this journal, agree to the following conditions:
1. Authors retain the copyright to the work and transfer to the journal the right of the first publication along with the work, at the same time licensing it under the terms of the Creative Commons Attribution License, which allows others to distribute this work with the obligatory indication of the authorship of this work and a link to the original publication in this journal .
2. The authors retain the right to enter into separate, additional contractual agreements for the non-exclusive distribution of the version of the work published by this journal (for example, to place it in the university depository or to publish it in a book), with reference to the original publication in this journal.
3. Authors are allowed to post their work on the Internet (for example, in a university repository or on their personal website) before and during the review process of this journal, as this may lead to a productive discussion, as well as more links to this published work.