PHYSICO-CHEMICAL PARAMETERS OF SIBERIAN LARCH (LARIX SIBIRICA) BARK EXTRACTED WITH WATER-AMINO-ALCOHOLIC EXTRACTANTS
UDC 630*81
Abstract
This paper presents the results of a thermal analysis, that involved thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC), of natural bark of Siberian larch (Larix sibirica Ldb.) vs. the bark extracted with 5% water-monoethanolamine (MEA) and (vs.) 5% water-triethanolamine (TEA). Thermogravimetric data obtained in an oxidative (air) atmosphere allowed us to identify temperature ranges of thermal decomposition stages for the larch bark samples, as well as to determine the corresponding mass loss and mass loss rate at programmed heating. The Ozawa-Flynn-Wall (OFW) method was used to calculate the dependence of activation energy of the thermal decomposition of experimental samples on the conversion degree (Еа = f(a)); the symbate run of Еа = f(a) curves was established. The DSC data obtained agreed with those of TG/DTG. The integral heat of the bark thermal decomposition (9.60 kJ/g and 14.12 kJ/g for MEA and TEA, respectively) indicated the bark to be competitive with other biofuels, such as briquetted lignin, wood pellets, sunflower husk, rapeseeds, and straw.
Downloads
Metrics
References
Loskutov S.R., Permyakova G.V., Aniskina A.A., Peryshkina G.I. Rastitelnye resursy, 1997, vol. 33, no. 2, pp. 74–78. (in Russ.).
Permyakova G.V., Loskutov S.R., Semenovich A.V. Khimija Rastitel'nogo Syr'ja, 2008, no. 2, pp. 43–46. (in Russ.).
Loskutov S.R., Semenovich A.V., Permyakova G.V. Khimija Rastitel'nogo Syr'ja, 2008, no. 2, pp. 113–117. (in Russ.).
Loskutov S.R., Semenovich A.V., Aniskina A.A., Permyakova G.V., Plyashechnik M.A. Produkty tekhnicheskogo naznacheniya iz kory khvoynykh porod. [Technical products from coniferous bark]. Novosibirsk, 2010, 113 p. (in Russ.).
Semenovich A.V., Loskutov S.R. Khimija Rastitel'nogo Syr'ja, 2015, no. 4, pp. 101–109. (in Russ.).
Semenovich A.V., Shapchenkova O.A., Aniskina A.A., Loskutov S.R. Journal bulletin of ASAU, 2016, vol. 14, no. 1, pp. 76–81.
Patent 2678683 (RU). 2019. (in Russ.).
Loskutov S.R., Petrunina E.A., Shapchenkova O.A., Plyashechnik M.A., Stasova V.V. Lesnoy vestnik, 2020, no. 2, pp. 98–110. (in Russ.).
Dulman V., Odochian L., Dumitras M., Cucuman S. J. Serb. Chem. Soc., 2005, vol. 70, no. 11, pp. 1325–1333. DOI: 10.2298/JSC0511325D.
Shen D.K., Gua S., Luo K.H., Bridgwater A.V., Fang M.X. Fuel, 2009, vol. 88, pp. 1024–1030. DOI: 10.1016/j.fuel.2008.10.034.
Cruz G., Crnkovic P.M. J. Therm. Anal. Calorim., 2016, vol. 123, pp. 1003–1011. DOI: 10.1007/s10973-015-4908-2.
Loskutov S.R., Shapchenkova O.A., Aniskina A.A. Sibirsky Lesnoy Zhurnal, 2015, no. 6, pp. 17–30. (in Russ.).
Tyutkova E.A., Loskutov S.R., Shashkin A.V., Benkova V.E. J. Therm. Anal. Calorim., 2017, vol. 130, pp. 1391–1397. DOI: 10.1007/s10973-017-6550-7.
Shangguan W., Chen Z., Zhao J., Song X. Wood Sci. Technol., 2018, vol. 52, pp. 181–192. DOI: 10.1007/s00226-017-0959-9.
Broido A.A. J. Polym. Sci. Part A-2., 1969, vol. 7, no. 10, pp. 1761–1773. DOI: 10.1002/pol.1969.160071012.
Ozawa T.A. Chem. Soc. Jpn., 1965, vol. 38, no. 11, pp. 1881–1886. DOI: 10.1246/bcsj.38.1881.
Poletto M., Dettenborn J., Pistor V., Zeni M., Zattera F.J. Materials Research, 2010, vol. 13, no. 3, pp. 375–379. DOI: 10.1590/S1516-14392010000300016.
Haykiri-Acma H., Yaman S. World Renewable Energy Congress. Bioenergy Technology. Linkoping, 2011, pp. 251–257. DOI: 10.2495/WM120141.
Fang P., McGinnis G.D., Parish E.J. Wood and Fiber, 1975, vol. 7, no. 2, pp. 136–145.
Gaugler M., Grigsby W.J. Journal of Wood Chemistry and Technology, 2009, vol. 29, no. 4, pp. 305–321. DOI: 10.1080/02773810903165671.
Mamleev V., Dourbigot S., Le Bras M., Lefebvre J. J. Therm. Anal. Calorim., 2004, vol. 78, pp. 1009–1027.
![](http://journal.asu.ru/public/journals/1/article_8340_cover_ru_RU.jpg)
Copyright (c) 2021 chemistry of plant raw material
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors, which are published in this journal, agree to the following conditions:
1. Authors retain the copyright to the work and transfer to the journal the right of the first publication along with the work, at the same time licensing it under the terms of the Creative Commons Attribution License, which allows others to distribute this work with the obligatory indication of the authorship of this work and a link to the original publication in this journal .
2. The authors retain the right to enter into separate, additional contractual agreements for the non-exclusive distribution of the version of the work published by this journal (for example, to place it in the university depository or to publish it in a book), with reference to the original publication in this journal.
3. Authors are allowed to post their work on the Internet (for example, in a university repository or on their personal website) before and during the review process of this journal, as this may lead to a productive discussion, as well as more links to this published work.