PAPER AND CARDBOARD FROM THE STALKS OF KENAF AND SORGHUM SUGAR
Abstract
Chemical composition of kenaf and sugar sorghum was studied. It was established that the stems of the investigated plant raw materials in comparison with hardwood timber contain less lignin, more mineral and water soluble substances. Alkali-sulfite-alcohol method of obtaining pulp from kenaf and sugar sorghum stems for producing paper and paperboard. The possibility of bleaching organosolvent pulp from the kenaf and sugar sorghum stems by hydrogen peroxide without the use of chlorine-containing compounds was shown. The possibility of using non-wood organosolvent pulp in the composition of printing paper, cardboard for flat layers of corrugated cardboard and paper for corrugating was experimentally confirmed.
Downloads
Metrics
References
Smook G.A. Handbook for Pulp and Paper Technologists. TAPPI. Atlanta, 1994. 392 p.
2009 Per Capita Paper and Paperboard Consumption // RISI. Annual Historical Data – World Pulp. 2010.
Pihlajamjaki P., Hytonen H. Mixed tropical hardwood – a minor and declining source of fiber for paper // Twogether. 2004. N17. Pp. 2–6.
Hunter Robert (Bob) W. Non-wood Fiber – 2010 and belond. Prospects for non-wood paper production in Asia Pa-cific // APPITA. 2010. Рp. 56.
Харазов В.Г. и др. Технология целлюлозно-бумажного производства : в 3 т. (Сырье и производство полуфаб-рикатов). Ч. 2: Производство полуфабрикатов. СПб., 2003. 633 с.
Rousu P., Anttila J. Sustainable pulp production from agricultural waste // Resources, Conservation and Recycling. 2002. N5. Рp. 85–103.
Ruiz H.A., Ruzene D.S., Silva D.P., Vicente A.A., Teixeira J.A. Development and Characterization of an Environ-mentally Friendly Process Sequence (Autohydrolysis and Organosolv) for Wheat Straw Delignification // Appl Bio-chem Biotechnol. 2011. Рp. 629–641.
Sridach W. The environmentally benign pulping process of non-wood fibers // Suranaree J. Sci. Technol. 2002. Vol. 17. N2. Рp. 105–123.
Puthson P., Odermatt J., Zimmermann M., Patt R. ASAM pulping of eucalyptus camald // Holzforshlung. 1997. Vol. 3. N5. Pp. 257–262.
Shatalov A.A., Pereira H. Arundo donax L. reed: new perspectives for pulping and bleaching – organosolv delignifi-cation // TAPPI Peer-reviewed paper. Solution for people, processes and paper. 2001. Vol. 84(11). Pp. 1–11.
Barbash V.A., Trembus I.V., Okcentyk N.N. Solvolysis delignification of kenaf and sorghum sugar stalks // Research bulletin of National Technical University of Ukraine «KPI». 2012. N3. Рp. 93–97.
Nanko Hirko, Button Allan, Hillman Dave. The World of Market Pulp // Appleton, WI, USA: WOMP, LLC. 2005. Рp. 258.
Farsheh A.T., Firouzabadi M.D., Mahdavi S. Properties of kenaf (Hibiscus cannabinus L.) bast fiber reinforced ba-gasse soda pulp in comparison to long fiber // World Appl. Sci. J. 2011. N14(6). Pp. 906–909.
Демиденко Б.Г. Сорго. М., 1957. 158 с.
Оболенская А.В., Ельницкая З.П., Леонович А.А. Лабораторные работы по химии древесины и целлюлозы. М., 1991. 320 с.
Барбаш В.А., Трембус І.В. Обгрунтування методики визначення вмісту холоцелюлози в недеревній рослинній сировині // Наукові вісті НТУУ «КПІ». 2012. №1. С. 132–136.
Барбаш В.А. Методология сравнения эффективности процессов делигнификации растительного сырья // Ма-териалы V Всероссийской конференции с междунар. участием. 24–26 апр. 2012. / под. ред. Н.Г. Базарновой, В.И. Маркина. Барнаул, 2012. С. 67–69.
ГОСТ 10700-97. Макулатура бумажная и картонная. Технические условия. М., 1997. 10 с.
ГОСТ Р 53207-2008. Картон для плоских слоев гофрированного картона. Технические условия. М., 2009. 12 с.
ГОСТ Р 53206-2008. Бумага для гофрирования. Технические условия. М., 2009. 8 с.
Барбаш В.А., Трембус І.В., Алєксеєва М.С. Отримання волокнистих напівфабрикатів із нових рослин // Вісник НТУУ «КПІ» Хімічна інженерія, екологія та ресурсозбереження. 2010. Т. 5. №1. С. 79–83.
ГОСТ 9095-89. Бумага для печати типографская. Технические условия. М., 1990. 12 с.
ГОСТ 9571–60. Целлюлоза сульфатная беленная из хвойной древесины. Технические условия. М., 1987. 4 с.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors, which are published in this journal, agree to the following conditions:
1. Authors retain the copyright to the work and transfer to the journal the right of the first publication along with the work, at the same time licensing it under the terms of the Creative Commons Attribution License, which allows others to distribute this work with the obligatory indication of the authorship of this work and a link to the original publication in this journal .
2. The authors retain the right to enter into separate, additional contractual agreements for the non-exclusive distribution of the version of the work published by this journal (for example, to place it in the university depository or to publish it in a book), with reference to the original publication in this journal.
3. Authors are allowed to post their work on the Internet (for example, in a university repository or on their personal website) before and during the review process of this journal, as this may lead to a productive discussion, as well as more links to this published work.
