CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES OF VARIOUS PARTS OF BIRCH WOOD
UDC 674.038.1
Аннотация
The article compares mechanical parameters, group chemical compositions, iron content, lipid compositions before and after saponification, moisture, bulk density in three parts of Betula pubescens Ehrh. birch wooden parts: sapwood, false heartwood, false heartwood border. The strength properties of the false heartwood are worse than those of sapwood. The border of the false core is sometimes stronger than that of other parts. Evaluation is carried out in terms of hardness, flexural strength and compression strength. False heartwood, and even more so its border, contain more extractives extracted by ethanol, water, alkali solution, methylene chloride and less iron. The content of other components: cellulose, lignin, other polysaccharides differs, but less significantly. False heartwood border is heavier than the other wooden parts. Moisture content of the various parts decreases in the following order: false heartwood border, false heartwood, sapwood. The composition of the extractives extracted by methylene chloride is different in different parts. The composition is determined by gas-liquid chromatography-mass spectrometry before and after saponification of esters. Differences in sterols are given. An increased content of monoterpene alcohols and arylheptanoids is observed at the border. Differences in the properties of different wooden parts of a tree are explained by different amount and composition of extractives.
Скачивания
Metrics
Литература
Willför S., Sundberg A., Pranovich A., Holmbom B. Wood Science and Technology, 2005, vol. 39, pp. 601–617. DOI: 10.1007/s00226-005-0039-4.
Miranda I., Sousa V., Ferreira J., Pereira H. PLoS ONE, 2017, vol. 12, pp. 1–14. DOI: 10.1371/journal.pone.0179268.
Rykunin S.N., Kaptelkin A.A. Lesnoy zhurnal, 2019, no. 6, pp. 202–212. DOI: 10.17238/issn0536-1036.2019.6.202. (in Russ.).
Alekseeva L.G. Sbornik rabot po zaschite lesa. [Collection of works on forest protection]. 1957, no. 1, pp. 65–71. (in Russ.).
Alekseeva L.G. Lesnoy zhurnal, 1958, no. 6, pp. 13–23. (in Russ.).
Belleville B., Cloutier A., Achim A. Can. J. For. Res., 2011, vol. 41, pp. 1491–1499. DOI: 10.1139/x11-080.
Shigo A.L., Hillis W.E. Annual Review of Phytopathology, 1973, vol. 11, pp. 197–222. DOI: 10.1146/annurev.py.11.090173.001213.
Hallaksela A.M., Niemistö P. Scand. J. For. Res., 1998, vol. 13, pp. 169–176. DOI: 10.1080/02827589809382973.
Hörnfeldt R., Drouin M., Woxblom L. Ecological Bulletins Broadleaved Forests in southern Sweden: management for multiple goals, 2010, vol. 53, pp. 61–76.
Sinadsky Yu.V. Beresa i ee vrediteli. [Beresa and its pests]. Moscow, 1973, 220 p. (in Russ.).
GOST 16483.10-73. Drevesina. Metody opredeleniya predela prochnosti pri szhatii vdol' volokon (s Modifikatsiyami N 1, 2, 3) [GOST 16483.10-73. Wood. Methods for determining the ultimate strength in compression along the fibers (with Modifications N 1, 2, 3)]. Moscow, 1999, 7 p. (in Russ.).
GOST 16483.3-84. Drevesina. Metod opredeleniya predela prochnosti pri staticheskom izgibe [GOST 16483.3-84. Wood. Method for determination of ultimate strength in static bending]. Moscow, 1999, 7 p. (in Russ.).
GOST 16483.17-81. Drevesina. Metod opredeleniya staticheskoy tverdosti [GOST 16483.17-81. Wood. Method for determination of static hardness]. Moscow, 1999, 7 p. (in Russ.).
GOST 16483.0-89. Drevesina. Obshchiye trebovaniya k fiziko-mekhanicheskim ispytaniyam [GOST 16483.0-89. Wood. General requirements to physical and mechanical tests]. Moscow, 1999, 11 p. (in Russ.).
TAPPI T222 om: 2011. Acid-Insoluble Lignin in Wood and Pulp. Technical Association of the Pulp and Paper Indus-try, 2006, 14 p.
TAPPI T204: 2011. Solvent extractives of wood and pulp. Technical Association of the Pulp and Paper Industry: Peachtree Corners, GA, 2011, 12 p.
TAPPI T 212 om-2012 (R2018). One Percent Sodium Hydroxide Solubility of Wood and Pulp. Technical Association of the Pulp and Paper Industry, 2018, 4 p.
Swan B. Svensk Papperstidn, 1965, vol. 68, pp. 791–795.
Obolenskaya A.V., Elnitskaya Z.P., Leonovich A.A. Laboratornyye raboty po khimii drevesiny i tsellyulozy: Uchebnik dlya vuzov. [Laboratory work in the chemistry of wood and cellulose: Textbook for higher schools]. Moscow, 1991, 320 p. (in Russ.).
TAPPI T223: 2008. Pentosanes in wood and pulp. Technical Association of the Pulp and Paper Industry, 2010, 5 p.
TAPPI T207: 2008. Water Solubility of Wood and Pulp. 2008, 3 p.
TAPPI T211: 2016. Ash in Wood, Pulp, Paper and Paperboard: Combustion at 525 °C. 2016, 5 p.
Shulishov E.V., Klimenko I.P., Tomalin Yu. Sintezy organicheskikh soyedineniy. [Syntheses of Organic Compounds]. Moscow, 2008, pp. 266–269. (in Russ.).
Evert R.F. Rastitel'naya anatomiya Isava. Meristemy, kletki i tkani rastitel'nogo organizma: ikh stroyeniye, funktsii i razvitiye [Esau’s plant anatomy. Meristems, cells, and tissues of the plant body: their structure, function, and develop-ment]. Moscow, 2015, 600 p. (in Russ.).
Pape R. Rödkärna i björk: uppkomst, egenskaper och användning = Red heart in birch : origin, properties, and utili-zation. 2002.
Luostarinen K., Hakkarainen K. Scand. J. of Forest Research, 2019, vol. 34, pp. 577–584. DOI: 10.1080/02827581.2019.1662939.
Voipio R., Laakso T. Folia Forestalia, 1992, vol. 789, pp. 1–22.
Lönnberg B. Paperi ja Puu, 1975, vol. 8, pp. 507–516.
Lachowicz H., Wro´blewska H., Sajdak M., Komorowicz M., Wojtan R. Cellulose, 2019, vol. 26, pp. 3047–3067. DOI: 10.1007/s10570-019-02306-2.
Jahng Y., Park J.G. Molecules, 2018, vol. 23, pp. 3107–3149. DOI: 10.3390/molecules2312310.
Ponkratova A.O., Vedernikov D.N., Whaley A.K., Kuncova M.N., Smirnov S.N., Serebryakov E.B., Spiridono-va D.V., Luzhanin V.G. Natural Product Research, 2021, vol. 35, pp. 1–9. DOI: 10.1080/14786419.2021.2017930.
Beritognolo I., Magel E., Abdel-Latif A., Charpentier J.-P., Jay-Allemand C., Breton C. Tree Physiology, 2002, vol. 22, pp. 291–300. DOI: 10.1093/treephys/22.5.291.
Takanori I. Mokuzai Gakkaishi, 2012, vol. 58, pp. 11–22. DOI: 10.2488/jwrs.58.11.
Copyright (c) 2022 Химия растительного сырья
Это произведение доступно по лицензии Creative Commons «Attribution» («Атрибуция») 4.0 Всемирная.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Авторы, которые публикуются в данном журнале, соглашаются со следующими условиями:
1. Авторы сохраняют за собой авторские права на работу и передают журналу право первой публикации вместе с работой, одновременно лицензируя ее на условиях Creative Commons Attribution License, которая позволяет другим распространять данную работу с обязательным указанием авторства данной работы и ссылкой на оригинальную публикацию в этом журнале.
2. Авторы сохраняют право заключать отдельные, дополнительные контрактные соглашения на неэксклюзивное распространение версии работы, опубликованной этим журналом (например, разместить ее в университетском хранилище или опубликовать ее в книге), со ссылкой на оригинальную публикацию в этом журнале.
3. Авторам разрешается размещать их работу в сети Интернет (например, в университетском хранилище или на их персональном веб-сайте) до и во время процесса рассмотрения ее данным журналом, так как это может привести к продуктивному обсуждению, а также к большему количеству ссылок на данную опубликованную работу.
