NON-WOODEN RAW AS A SOURCE OF CELLULOSE FIBERS. USE PROSPECTS, PROBLEMS AND SOLUTIONS (REVIEW)
UDK 676.024
Abstract
The article discusses various non-wood plants as sources of fibrous raw materials for the pulp and paper industry. The authors cite the main categories of non-wood fibrous raw materials: agricultural waste, naturally growing plants and industrial crops. Information is provided on the position of fibers in the plant: fibers of the inner part of the stem, bast (outer part of the stem) fibers, leaf fibers and fruit fibers, as well as methods for their isolation. Of the variety of non-wood plants, the authors highlight industrial hemp as the most promising raw material, having strong fibers and a high cellulose content. The use of non-timber raw materials has been found to help reduce pressure on forest resources and improve the environmental sustainability of pulp and paper production. Technological aspects of the production of paper products from non-wood raw materials are also considered. The advantages and disadvantages of using alternative raw materials, as well as its prospects, are given. The need for further research and development of new methods and technologies to optimize the efficiency of using non-wood raw materials in the pulp and paper industry is pointed out. In conclusion, a conclusion is drawn about the importance of using non-wood raw materials to reduce the negative impact of paper production on the environment and ensure the sustainable development of this industry.
Downloads
Metrics
References
Ashori A. Polymer-Plastics Technology and Engineering, 2006, vol. 45, pp. 1133–1136. DOI: 10.1080/03602550600728976.
Azeez M.A. Pulp and Paper Processing. InTech, 2018. DOI: 10.5772/INTECHOPEN.79749.
Sridach W. Suranaree J. Sci. Technol., 2010, vol. 17, no. 2, pp. 105–123.
Chandra M. Use of Nonwood Plant Fibers for Pulp and Paper Industry in Asia: Potential in China. Blacksburg, 1998, 91 p.
Petroudy S.R. Advanced High Strength Natural Fibre Composites in Construction, 2017, pp. 59–83. DOI: 10.1016/B978-0-08-100411-1.00003-0.
Liu Z., Wang H., Hui L. Pulp and Paper Processing. InTech, 2018. DOI: 10.5772/INTECHOPEN.79017.
Saijonkari-Pahkala K. Agricultural and Food Science, 2001, vol. 10, 101 p. DOI: 10.23986/AFSCI.5707.
Polyutov A.A., Pen R.Z., Byvshev A.V. Tekhnologiya tsellyulozy. Ekologicheski chistoye proizvodstvo. [Cellulose technology. Environmentally friendly production]. Krasnoyarsk, 2012, 294 p. (in Russ.).
Novo L.P., Bras J., Belgacem M.N., Curvelo A.A. Journal of Renewable Materials, 2017, vol. 6, pp. 160–168. DOI: 10.7569/JRM.2017.634165.
Rainey T.J., Covey G. Sugarcane Based Biofuels and Bioproducts. John Wiley & Sons, 2016, pp. 259–280. DOI: 10.1002/9781118719862.CH10.
Rudi H., Resalati H., Eshkiki R.B., Kermanian H. Journal of Cleaner Production, 2016, vol. 127, pp. 562–566. DOI: 10.1016/J.JCLEPRO.2016.04.049.
Mehdikhani H., Jalali Torshizi H., Dahmardeh Ghalehno M. Nordic Pulp & Paper Research Journal, 2019, vol. 34, pp. 250–263. DOI: 10.1515/npprj-2019-0032.
Normatov G.A., Primkulov M.T. Universum: tekhnicheskiye nauki, 2018, no. 11(56), pp. 8–10. (in Russ.).
Normatov G.A., Primkulov M.T. Universum: tekhnicheskiye nauki, 2018, no. 12(57), pp. 107–110. (in Russ.).
Shakhvorostov A.V., Ibrayeva Zh.Ye., Kudaybergenov S.Ye. Novosti nauki Kazakhstana, 2017, no. 3(133), pp. 132–140. (in Russ.).
Vargas F., Gonzalez Z., Sánchez R.M., Jiménez L., Rodríguez A. BioResources, 2012, vol. 7(3), pp. 4161–4170. DOI: 10.15376/BIORES.7.3.4161-4170.
Fišerová M., Gigac J., Majtnerová A., Szeiffova G. Cellulose Chemistry and Technology, 2006, vol. 40, pp. 405–412.
Yeliseyeva T., Tarantul A. Zhurnal zdorovogo pitaniya i diyetologii, 2018, no. 5, pp. 31–42. (in Russ.).
Ramdhonee A., Jeetah P. Journal of environmental chemical engineering, 2017, vol. 5, pp. 4298–4306. DOI: 10.1016/J.JECE.2017.08.011.
Yeliseyeva T., Tarantul A. Zhurnal zdorovogo pitaniya i diyetologii, 2018, no. 6, pp. 55–65. (in Russ.).
Sibaly S., Jeetah P. Journal of environmental chemical engineering, 2017, vol. 5, pp. 5978–5986. DOI: 10.1016/J.JECE.2017.11.026.
Chesca A.M., Nicu R., Tofanica B.M., Puițel A.C., Vlase R., Gavrilescu D. Cellulose Chem. Technol., 2018, vol. 52 (7-8), pp. 645–653.
Ferdous T., Quaiyyum M.A., Salam A., Jahan M.S. Current Research in Green and Sustainable Chemistry, 2020, vol. 3, 100017. DOI: 10.1016/j.crgsc.2020.100017.
Mousavi S.M., Hosseini S.Z., Resalati H., Mahdavi S., Garmaroody E.R. Journal of Cleaner Production, 2013, vol. 52, pp. 420–424. DOI: 10.1016/J.JCLEPRO.2013.02.016.
Deykun I., Halysh V., Barbash V. Cellulose Chemistry and Technology, 2018, vol. 52, pp. 833–839.
Torgashov V.I., Gert Ye.V., Zubets O.V., Kaputskiy F.N. Vestnik BGU. Seriya 2: Khimiya. Biologiya. Geografi-ya, 2008, no. 2, pp. 12–20. (in Russ.).
Chaowei W., Chong L., Fan X., Xiangfan W., Yangbing W. Cellulose Chemistry and Technology, 2019, vol. 53, pp. 1009–1015. DOI: 10.35812/cellulosechemtechnol.2019.53.99.
Rodríguez A., Moral A., Serrano L., Labidi J., Jiménez L. Bioresource technology, 2008, vol. 99, pp. 2881–2886. DOI: 10.1016/J.BIORTECH.2007.06.003.
Tripathi K.A., Mishra O.P., Bhardwaj N.K., Varadhan R. Cellulose Chem. Technol., 2018, vol. 52 (1-2), pp. 81–88.
Kkhoa Kh.M., Maslennikova A.A., Okulova Ye.O., Kazakov Ya.V. Khimiya i khimicheskaya tekhnologiya pere-rabotki rastitel'nogo syr'ya: materialy dokladov Mezhdunarodnoy nauchno-tekhnicheskoy konferentsii, posvyash-chennoy 100-letiyu so dnya rozhdeniya V.M. Reznikova, Minsk, 10–12 oktyabrya 2018 goda. [Chemistry and chemical technology for processing plant raw materials: materials of reports of the International Scientific and Technical Conference dedicated to the 100th anniversary of the birth of V.M. Reznikova, Minsk, October 10–12, 2018]. Minsk, 2018, pp. 151–155. (in Russ.).
Reddy K.O., Maheswari C.U., Shukla M., Muzenda E. Separation Science and Technology, 2014, vol. 49, pp. 1527–1534. DOI: 10.1080/01496395.2014.893358.
Reddy K.O., Maheswari C.U., Shukla M., Rajulu A.V. Materials Letters, 2012, vol. 67, pp. 35–38. DOI: 10.1016/J.MATLET.2011.09.027.
Gomes F.J., Colodette J.L., Burnet A., Batalha L.A., Barbosa B.M. Bioresources, 2013, vol. 8, pp. 4359–4379. DOI: 10.15376/BIORES.8.3.4359-4379.
Daud Z., Gomesh N., Santiagoo R., Tajarudin H.A., Awang H.B., Hatta M.Z.M., Ridzuan M.B., Detho A.B. IOP Conference Series: Earth and Environmental Science, 2020, vol. 616, 012064. DOI: 10.1088/1755-1315/616/1/012064.
Jiménez L., Ramos E.E., Rodríguez A.G., de la Torre M.J., Ferrer J.L. Bioresource technology, 2005, vol. 96, no. 9, pp. 977–983. DOI: 10.1016/J.BIORTECH.2004.09.016.
Budayeva V.V., Mitrofanov R.Yu., Zolotukhin V.N., Sakovich G.V. Polzunovskiy vestnik, 2009, no. 3, pp. 328–335. (in Russ.).
Budayeva V.V., Mitrofanov R.Yu., Zolotukhin V.N., Arkhipova O.S. Polzunovskiy vestnik, 2010, no. 3, pp. 240–245. (in Russ.).
Kapustyanchik S.Yu., Yakimenko V.N. Pochvy i okruzhayushchaya sreda, 2020, vol. 3, no. 3, e126. DOI: 10.31251/pos.v3i3.126. (in Russ.).
Marinho N.P., Cademartori P.H., Nisgoski S., Tanobe V.O., Klock U., Muñiz G.I. Carbohydrate polymers, 2020, vol. 230, 115579. DOI: 10.1016/j.carbpol.2019.115579.
Baymukhametova E.A. Biomika, 2016, vol. 8, no. 3, pp. 275–288. (in Russ.).
Podol'naya L.P., Grigor'yev S.V., Illarionova K.V. i dr. Dostizheniya nauki i tekhniki APK, 2015, vol. 29, no. 7, pp. 56–58. (in Russ.).
Novikov A.O., Temruk V.I., Solov'yeva T.V. i dr. Trudy BGTU. Khimiya, tekhnologiya organicheskikh veshchestv i biotekhnologiya, 2012, no. 4(151), pp. 157–161. (in Russ.).
Barbash V.A., Trembus I.V., Oksentyuk N.N. Khimiya rastitel'nogo syr'ya, 2014, no. 4, pp. 271–278. (in Russ.).
Ramirez-Cando L.J., Spugnoli P., Matteo R., Bagatta M., Tavarini S., Foschi L., Lazzeri L. Chemical engineering transactions, 2017, vol. 58, pp. 787–792. DOI: 10.3303/CET1758132.
Bogdanova O.F., Berezovskiy Yu.V. Materialy i tekhnologii, 2018, no. 2(2), pp. 9–13. DOI: 10.24411/2617-149X-2018-12001. (in Russ.).
Bogdanova O.F., Putintseva S.V. Materialy dokladov 46 respublikanskoy nauchno-tekhnicheskoy konferentsii prepodavateley i studentov, Vitebsk, 24–25 aprelya 2013 goda. [Materials of reports of the 46th Republican Scien-tific and Technical Conference of Teachers and Students, Vitebsk, April 24–25, 2013]. Vitebsk, 2013, pp. 261–264. (in Russ.).
Małachowska E., Przybysz P.J., Dubowik M., Kucner M., Buzała K.P. Annals of Warsaw University of Life Sci-ences – SGGW. Forestry and Wood Technology, 2015, vol. 91, pp. 134–137.
Werf H.V., Veen J.H., Bouma A.T., Cate M.T. Industrial Crops and Products, 1994, vol. 2, pp. 219–227. DOI: 10.1016/0926-6690(94)90039-6.
Valishina Z.T., Aleksandrov A.A., Matukhin Ye.L. i dr. Vestnik Tekhnologicheskogo universiteta, 2015, vol. 18, no. 2, pp. 259–262. (in Russ.).
Manaia J.P., Manaia A., Rodriges L. Fibers, 2019, vol. 7, 106. DOI: 10.3390/fib7120106.
Horne M.R. Handbook of Natural Fibres. Types, Properties and Factors Affecting Breeding and Cultivation, 2012, vol. 1, pp. 114–145. DOI: 10.1533/9780857095503.1.114.
Fike J.H. Critical Reviews in Plant Sciences, 2016, vol. 35, pp. 406–424. DOI: 10.1080/07352689.2016.1257842.
Angelini L.G., Tavarini S., Di Candilo M. Journal of Natural Fibers, 2016, vol. 13, pp. 238–252. DOI: 10.1080/15440478.2015.1029193.
Lühr C., Pecenka R., Gusovius H., Wallot G., Rinberg R., Tech S. The Journal of Agricultural Science, 2012, vol. 5, pp. 9–16. DOI: 10.5539/JAS.V5N1P9.
Münder F., Fürll C., Hempel H. Journal of Natural Fibers, 2004, vol. 1, pp. 49–65. DOI: 10.1300/J395v01n01_04.
Xu J. Analysis and design of hemp fibre decorticators. Winnipeg, 2010, 100 p.
Amode N.S., Jeetah P. Waste and Biomass Valorization, 2021, vol. 12, pp. 1781–1802. DOI: 10.1007/s12649-020-01125-y.
Perevozchikova A.K. Ustoychivoye razvitiye: nauka i praktika, 2022, no. 1(33), pp. 49–78. (in Russ.).
Kocheva L.S. Fevral'skiye chteniya: sbornik materialov nauchno-prakticheskoy konferentsii professorsko-prepodavatel'skogo sostava Syktyvkarskogo lesnogo instituta po itogam nauchno-issledovatel'skoy raboty v 2007 godu, Syktyvkar, 27–28 fevralya 2008 goda. [February readings: collection of materials of the scientific and prac-tical conference of the teaching staff of the Syktyvkar Forestry Institute based on the results of research work in 2007, Syktyvkar, February 27–28, 2008]. Syktyvkar, 2008, pp. 598–602. (in Russ.).
Pantyushina O.V. Vestnik torgovo-tekhnologicheskogo institute, 2010, no. 3, pp. 36–41. (in Russ.).
Abd El-Sayed E.S., El-Sakhawy M.A., El-Sakhawy M.A. Nordic Pulp & Paper Research Journal, 2020, vol. 35, pp. 215–230. DOI: 10.1515/npprj-2019-0064.
Karche T., Singh M.R. Turkish Journal of Botany, 2019, vol. 43, pp. 710–723. DOI: 10.3906/bot-1907-15.
Smirnova T.V., Barabanshchikova I.S. Fizika voloknistykh materialov: struktura, svoystva, naukoyemkiye tekhnologii i materially, 2020, no. 1, pp. 10–14. DOI: 10.47367/2413-6514_2020_1_10. (in Russ.).
Figueiredo J.A., Ismael M.I., Anjo C., Duarte A.P. Topics in current chemistry, 2010, vol. 294, pp. 117–128. DOI: 10.1007/128_2010_88.
Biermann C.J. Handbook of Pulping and Papermaking (Second Edition). San Diego: Academic Press, 1996, pp. 55–100. DOI: 10.1016/B978-012097362-0/50007-8.
Worku L.A., Bachheti A., Bachheti R.K., Rodrigues Reis C.E., Chandel A.K. Membranes, 2023, vol. 13, 228. DOI: 10.3390/membranes13020228.
Eugenio M.E., Ibarra D., Martín-Sampedro R., Espinosa E., Bascón I., Rodríguez A. Cellulose. IntechOpen, 2019. DOI: 10.5772/intechopen.90041.
Keijsers E., Yilmaz G., van Dam J.E. Carbohydrate polymers, 2013, vol. 93, pp. 9–21. DOI: 10.1016/j.carbpol.2012.08.110.
Mboowa D. Biomass Conversion and Biorefinery, 2024, vol. 14, pp. 1–12. DOI: 10.1007/s13399-020-01243-6.
Vurasko A.V., Simonova Ye.I., Minakova A.R., Sivakov V.P. Khimiya rastitel'nogo syr'ya, 2019, no. 3, pp. 269–276. DOI: 10.14258/jcprm.2019035203. (in Russ.).
Vurasko A.V., Antonenkova S.G., Ageyev A.Ya. i dr. Lesnoy vestnik, 2000, no. 1, pp. 100–104. (in Russ.).
Tekhnologiya tsellyulozno-bumazhnogo proizvodstva. V 3 t. T. I. Syr'ye i proizvodstvo polufabrikatov. Ch. 2. Pro-izvodstvo polufabrikatov. [Pulp and paper production technology. In 3 volumes. Vol. I. Raw materials and pro-duction of semi-finished products. Part 2. Production of semi-finished products]. St. Petersburg, 2003, 633 p. (in Russ.).
Pen R.Z., Shapiro I.L., Karetnikova N.V. Khimiya rastitel'nogo syr'ya, 2022, no. 2, pp. 299–305. DOI: 10.14258/jcprm.20220210688. (in Russ.).
Gismatulina YU.A., Budayeva V.V. Polzunovskiy vestnik, 2016, no. 4-1, pp. 174–178. (in Russ.).
Chen C., Duan C., Li J., Liu Y., Ma X., Zheng L., Stavik J., Ni Y. BioRes., 2016, vol. 11(2), pp. 5553–5564.
Primakov S.F. Proizvodstvo bumagi. [Paper production]. Moscow, 1987, 222 p. (in Russ.).
Gorazdova V.V., Dernova Ye.V., Dul'kin D.A., Okulova Ye.O. Izvestiya vysshikh uchebnykh zavedeniy. Lesnoy zhurnal, 2018, no. 2(362), pp. 109–121. DOI: 10.17238/issn0536-1036.2018.2.109. (in Russ.).
Karpunin I.I., Kuz'mich V.V., Balabanova T.F. Energetika. Izvestiya vysshikh uchebnykh zavedeniy i energetich-eskikh ob"yedineniy SNG, 2011, no. 6, pp. 72–75. (in Russ.).
Susoyeva I.V., Vakhnina T.N., Sviridov A.V. Khimiya rastitel'nogo syr'ya, 2017, no. 3, pp. 211–220. DOI: 10.14258/jcprm.2017031492. (in Russ.).
Girouard P., Samson R. Pulp and Paper, 2000, vol. 101(10), pp. 53–55.
Sadrmanesh V., Chen Y. International Materials Reviews, 2018, vol. 64, pp. 381–406. DOI: 10.1080/09506608.2018.1501171.
Copyright (c) 2024 chemistry of plant raw material
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors, which are published in this journal, agree to the following conditions:
1. Authors retain the copyright to the work and transfer to the journal the right of the first publication along with the work, at the same time licensing it under the terms of the Creative Commons Attribution License, which allows others to distribute this work with the obligatory indication of the authorship of this work and a link to the original publication in this journal .
2. The authors retain the right to enter into separate, additional contractual agreements for the non-exclusive distribution of the version of the work published by this journal (for example, to place it in the university depository or to publish it in a book), with reference to the original publication in this journal.
3. Authors are allowed to post their work on the Internet (for example, in a university repository or on their personal website) before and during the review process of this journal, as this may lead to a productive discussion, as well as more links to this published work.
