RESEARCH OF HYDRAULIC RESISTANCE OF VORTEX RECTIFICATION STAGES
UDC 66.015.23
Abstract
The article deals with the issue of studying the hydraulic resistance of vortex contact stages for rectification equipment used for separation of alcohol-containing solutions obtained on the basis of hydrolysate of vegetable raw materials. Based on the conducted research, the dependences for determining the hydraulic resistance coefficient for axial and tangential swirlers are obtained. It is shown how the design parameters affect the change in the coefficient of hydraulic resistance. Hydraulic resistance is an important hydrodynamic characteristic of contact stages, which characterizes the energy consumption of the gas flow for the mass transfer process and determines the scope of its application in practice. Knowledge of the amount of hydraulic losses in the device is also necessary when calculating the schemes of technological strapping of the device. Currently, there are numerous data on the study of regularities in the domestic and foreign literature.
Downloads
Metrics
References
Voynov N.A., Kustov A.V., Nikolayev N.A. Khvoynyye boreal'noy zony, 2012, no. 3–4, pp. 373–378. (in Russ.).
Kustov A.V. Gidrodinamika i massoobmen na vikhrevykh rektifikatsionnykh stupenyakh pri pererabotki rasti-tel'nogo syr'ya: dis. … kand. tekhn. nauk. [Hydrodynamics and mass transfer at vortex rectification stages during processing of plant raw materials: dis. ... Cand. tech. sciences]. Krasnoyarsk, 2009, 143 p. (in Russ.).
Vyazovkin Ye.S. Issledovaniye gidrodinamiki i effektivnosti vikhrevykh kontaktnykh stupeney: avtoref. dis. … kand. tekhn. nauk. [Research of hydrodynamics and efficiency of vortex contact stages: abstract of dis. ... Cand. tech. sciences]. Kazan', 1972, 24 p. (in Russ.).
Margolin Ye.V. Vybor optimal'nykh parametrov vertikal'nogo kapleulovitelya. [Selection of the optimal parameters for the vertical drop catcher]. Moscow, 1976, no. 3, pp. 11–13. (in Russ.).
Mustashkin F.A. Trudy Kazananskogo khimiko-tekhnologicheskogo instituta, 1970, issue 45, pp. 26–31. (in Russ.).
Levdanskiy E.I. 3-ya Vses. konf. po teorii i praktike rektifikatsii. [3rd Vses. conf. on the theory and practice of rectifica-tion]. Severodonetsk, 1973, vol. 2, pp. 258–261. (in Russ.).
Platonov V.M. Razdeleniye mnogokomponentnykh smesey. [Separation of multicomponent mixtures]. Moscow, 1965, 368 p. (in Russ.).
Yershov A.I. Novyye konstruktsii separatorov dlya ochistki gazov. Obzornaya informatsiya. [New designs of separa-tors for gas cleaning. Survey information]. Minsk, 1973, 36 p. (in Russ.).
Gol'dshtik M.A. Protsessy perenosa v zernistom sloye. [Transfer processes in the granular layer]. Novosibirsk, 2005, 358 p. (in Russ.).
Voynov N.A., Nikolayev N.A., Kustov A.V. Khimicheskaya promyshlennost', 2008, vol. 85, no. 8, pp. 413–419. (in Russ.).
Ovchinnikov A.A. Dinamika dvukhfaznykh zakruchennykh turbulentnykh techeniy v vikhrevykh separatorakh. [Dynam-ics of two-phase swirling turbulent flows in vortex separators]. Kazan', 2005, 288 p. (in Russ.).
Kustov A.V., Shastovskiy P.S., Goncharova Ya.S., Alashkevich Yu.D., Sergiyakova Yu.T., Vasil'chenko Ye.S., Karelina A.A. Khimicheskaya promyshlennost' segodnya, 2017, no. 1, pp. 34–41. (in Russ.).
Kustov A.V., Artishcheva N.A., Mezhov V.G., Alashkevich Yu.D. Khimiya rastitel'nogo syr'ya, 2016, no. 3, pp. 125–134. (in Russ.).
Voynov N.A., Nikolayev N.A., Kustov A.V., Nikolayev A.N., Tarovatyy D.N. Khimiya rastitel'nogo syr'ya, 2008, no. 3, pp. 173–184. (in Russ.).
Kustov A.V., Artishcheva N.A., Karelina A.A., Litvinova M.M. Khimicheskiye tekhnologii funktsional'nykh materialov. Materialy V Mezhdunarodnoy Rossiysko-Kazakhstanskoy nauchno-prakticheskoy konferentsii. [Chemical technologies of functional materials. Materials of the V International Russian-Kazakh scientific-practical conference]. 2019, pp. 307–309. (in Russ.).
Litvinova M.M., Karelina A.A. Khimicheskiye tekhnologii funktsional'nykh materialov. Materialy V Mezhdunarodnoy Rossiysko-Kazakhstanskoy nauchno-prakticheskoy konferentsii. [Chemical technologies of functional materials. Materi-als of the V International Russian-Kazakh scientific-practical conference]. 2019, pp. 146–149. (in Russ.).
Zemtsov D.A. Razrabotka kolonn termicheskoy rektifikatsii v tekhnologiyakh pererabotki rastitel'nogo syr'ya: dis. … kand. tekhn. nauk. [Development of columns for thermal rectification in technologies for processing plant raw materials: dis. ... Cand. tech. sciences]. Krasnoyarsk, 2017, 112 p. (in Russ.).
Voronin S.M. Povysheniye ekologichnosti protsessov pererabotki rastitel'nogo syr'ya: dis. … kand. tekhn. nauk. [Im-proving the environmental friendliness of the processing of plant raw materials: dis. ... Cand. tech. sciences]. Krasnoyarsk, 1997, 200 p. (in Russ.).
Trachuk A.V. Issledovaniye i razrabotka vikhrevykh apparatov s vrashchayushchimsya mnogofaznym sloyem: avtoref. dis. ... kand. tekhn. nauk. [Research and development of vortex devices with a rotating multiphase layer: abstract of the-sis. ... Cand. tech. sciences]. Novosibirsk, 2009, 25 p. (in Russ.).
Voinov N.A. Russian Journal of Applied Chemistry, 2009, vol. 82, no. 4, pp. 730–735.
Copyright (c) 2020 chemistry of plant raw material
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors, which are published in this journal, agree to the following conditions:
1. Authors retain the copyright to the work and transfer to the journal the right of the first publication along with the work, at the same time licensing it under the terms of the Creative Commons Attribution License, which allows others to distribute this work with the obligatory indication of the authorship of this work and a link to the original publication in this journal .
2. The authors retain the right to enter into separate, additional contractual agreements for the non-exclusive distribution of the version of the work published by this journal (for example, to place it in the university depository or to publish it in a book), with reference to the original publication in this journal.
3. Authors are allowed to post their work on the Internet (for example, in a university repository or on their personal website) before and during the review process of this journal, as this may lead to a productive discussion, as well as more links to this published work.